Industrial Battery Chargers

Start by identifying your equipment type (scrubber, sweeper, forklift, pallet truck, stacker, golf cart, SMPS or maintenance application), then verify the battery's nominal voltage, chemistry, capacity, connector and charging arrangement (onboard or external). Choose a charger designed for your battery pack's nominal voltage, chemistry and charging requirements. The charger's actual charging voltage must follow the battery manufacturer's specifications. If you are unsure, send us photographs of your equipment plate, battery label and existing charger on WhatsApp and we will identify the correct category and charger for you.

Only if the charger's voltage, chemistry, charging profile, current and connector all match the specific battery installed in each piece of equipment. Two different machines may both use 24V packs, but if one is flooded lead-acid and the other is GEL, or if the connectors differ, the same charger may not be suitable for both. Voltage and current ratings alone are not sufficient to establish compatibility. Always confirm the battery chemistry, charging profile and connector before using a charger across different equipment.

SAMCO's standard SMPS chargers are designed for lead-acid batteries — flooded, AGM and GEL. GEL batteries charge at a lower voltage than flooded lead-acid, so SAMCO configures chargers for GEL before dispatch (it is not a front-panel setting). Lithium LiFePO4 batteries have different charging profiles, voltage limits and termination logic, and may require a charger specifically designed for the battery's chemistry and battery management system (BMS). A charger designed for one chemistry should not automatically be used with another. Always follow the battery manufacturer's recommended charging current and profile.

Yes. We ship industrial battery chargers from our Delhi facility to 19,000+ pin codes across India. Free shipping is available on most orders, with COD available for qualifying deliveries. Most orders arrive in 2–7 business days depending on the destination. For Delhi and Delhi NCR (Noida, Greater Noida, Gurugram, Ghaziabad, Faridabad), local delivery is faster and we can also arrange direct pickup from our Gokhale Market facility near Kashmere Gate Metro Station.

Yes. Send us clear photographs of the equipment identification plate, the battery label (showing voltage, Ah and chemistry) and the existing charger's specification label and connector. We will review the information, identify the correct industrial charger category, and confirm whether a suitable replacement is available before accepting the order. There is no charge for this assessment. We do not dispatch a charger until compatibility has been reviewed.

A regular industrial battery charger restores a discharged battery to full charge (bulk charging). A maintenance charger goes further: after the battery reaches full charge, it holds the battery at a controlled float voltage that compensates for self-discharge without overcharging — safe for extended connection over days, weeks or months. A maintenance charger is not a recovery device; not every discharged or damaged battery can be recovered. See our industrial battery maintenance charger page for details.

Send: (1) equipment type, (2) equipment manufacturer and model, (3) photograph of the equipment identification plate, (4) photograph of the battery label showing voltage, Ah and chemistry, (5) photograph of the existing charger's specification label and connector, (6) pack voltage, (7) battery chemistry, and (8) connector type and charging arrangement (onboard or external). Even partial information is usually enough for us to begin the review and identify the correct charger category.